HesapHanem

Water Hardness Converter

Convert water hardness between common units.

How it is calculated

Water hardness is expressed in several units, and the tool converts through one reference, ppm as CaCO3 (mg per litre). The factors used are: 1 gpg (grains per US gallon) = 17.118 ppm, 1 °dH (German degree) = 17.848 ppm, 1 mmol/L = 100.0869 ppm. So ppm = value × factor of the unit you picked, then each output is ppm ÷ its own factor. The unit defaults to ppm, and an unknown unit is treated as ppm. Negative values give no result. All four results are shown to two decimals. The tool converts units only; it does not say whether the water counts as soft or hard, as those ranges vary between sources.

Worked example

Take 10 °dH. ppm = 10 × 17.848 = 178.48. In grains per gallon: 178.48 ÷ 17.118 = 10.43. In °dH it is of course 10.00. In mmol/L: 178.48 ÷ 100.0869 = 1.78. The tool shows 178.48 ppm, 10.43 gpg, 10.00 °dH and 1.78 mmol/L.

Try this example →

Common mistakes

  • Leaving the unit on ppm while typing a °dH value. 10 ppm is very soft water, while 10 °dH is moderately hard; pick the unit that matches your number.
  • Confusing gpg with °dH. They are different scales (17.118 vs 17.848 ppm per unit), so 10 gpg is not 10 °dH.
  • Mixing mmol/L of calcium alone with total hardness. This conversion assumes the value is total hardness expressed as CaCO3.
  • Expecting a hard/soft verdict. The tool only converts units; classification thresholds depend on the source.
  • Rounding the factors yourself. Small differences in the factor, like 17.8 instead of 17.848, add up at larger values.

Sources

About this calculator

This tool converts water hardness between the four units labs and manufacturers use: ppm / mg/L as CaCO₃, grains per gallon (gpg) (1 gpg = 17.118 ppm), German degrees (°dH) (1 °dH = 17.848 ppm), and millimoles per liter (mmol/L) of calcium carbonate. Water hardness reflects the dissolved calcium and magnesium content, which affects soap lathering, scale buildup, and the settings needed on a water softener.

Homeowners reading a water utility report, water treatment professionals sizing a softener, and appliance manufacturers specifying compatible water conditions use it to translate a hardness figure from one region's or lab's preferred unit into another.

Was this helpful?

You can pick up to 3 reactions.

Comments (1)

  • Editorial team

    All four outputs here are tied to calcium carbonate, so a lab report that gives hardness as separate calcium and magnesium figures has to be converted to CaCO3 equivalents first. Note too that gpg means US grains per US gallon, and other degree scales, such as the British Clark or French degree, are not included. Which hardness unit does your water report or appliance manual use that you do not see in this list?

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators